Bush Hammering machine DGF-1004.3011

The bush hammering machine, which is a specific machine for limestone, sandstone or marble, is formed with a mechano-welded frame with a roller table, where slides the conveyor belt, that is electrically driven by a frequency inverter, to regulate according to the desired production.

VIDEO: https://www.youtube.com/watch?v=CNkteDMWiLA

Description

              The bush hammering machine, which is a specific machine for limestone, sandstone or marble, is formed with a mechano-welded frame with a roller table, where slides the conveyor belt, that is electrically driven by a frequency inverter, to regulate according to the desired production.

 – The automatic rotating bush hammering plate can make high productions.

 – The hammer plate is “Frankfurt” type with 3-4 abrasives

 – The head holder transversal displacement, which slides on two cylindrical guides, is carried out through an electric motor. Its swing is determined by an encoder that the operator may determine according to the width of the process to be carried out.

 The working pressure is regulated by two controls, with one we control the pressure and with the other the counter pressure. The head moves over the bridge on calibrated round guides, the speed being regulated by a frequency inverter.

 It has a programmable PLC and a terminal with touchscreen, the work cycles are programmable automatically, being able to select the work mode.

 The whole machine has a centralized greasing implantation system and safety protections according to CE standards.

 

WATCH THE  VIDEO: https://www.youtube.com/watch?v=CNkteDMWiLA